Identifying Interface Numbers In The Cli - Juniper MX104 Hardware Manual

Table 47: MX104 MIC Interface Names (continued)
Component
MIC 0 (left) installed in MPC 0 (labeled
MIC 1 (right) installed in MPC 0 (labeled
MIC installed in MIC slot 1/0
MIC installed in MIC slot 1/1

Identifying Interface Numbers in the CLI

Copyright © 2017, Juniper Networks, Inc.
Component Name in the
CLI
0/0 ) See
Module Reference
)
0/1
In the physical part of the interface name, a hyphen (
the MPC number (represented as an
PIC and port numbers:
type-fpc/pic/port
type—Media type, which identifies the network device. For example:
ge—Gigabit Ethernet interface
so—SONET/SDH interface
xe—10-Gigabit Ethernet interface
For a complete list of media types, see Interface Naming Overview.
fpc—Slot in which the MPC is installed. On the MX104 router, the three MPCs are built
into the chassis and are represented in the CLI as
pic—Logical PIC on the MIC. The number of logical PICs varies depending on the type
of MIC.
port—Port number.
NOTE: The MIC number is not included in the interface name.
The following sample CLI output displays the three built-in MPCs and five MICs.
user@host> show chassis hardware
Hardware inventory:
Item Version
Chassis
Chapter 5: Line Card Components and Descriptions
Interface Names
MX Series Interface type-0/0/port
.
type-0/1/port
type-0/2/port
type-0/3/port
type-1/0/port
type-1/1/port
type-1/2/port
type-1/3/port
in the CLI), and a slash (
FPC
FPC 0
Part number Serial number
G3498
- ) separates the media type from
) separates the logical
/
, FPC 1 , or FPC 2 .
Description
MX104
55