Juniper MX104 Hardware Manual page 121

Table 69: AC Power Cord Specifications (continued)
Country Model Number
North America CBL-PWR-C15M-HITEMP-US
United Kingdom CBL-PWR-C15M-HITEMP-UK
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Electrical Specification
125 VAC, 13 A, 60 Hz
250 VAC, 10 A, 50 Hz
WARNING: The attached power cable is only for this product. Do not use the
cable for another product. Translation in Japanese follows:
NOTE: In North America, AC power cords must not exceed approximately
14.75 ft (4.5 m) in length, to comply with National Electrical Code (NEC)
Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical Code
(CEC) Section 4-010(3). You can order AC power cords that are in compliance.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
NOTE: Use power cords rated up to 149° F (65° C) for ambient temperatures
up to 140° F (60° C).
Connecting AC Power Cords to the MX104 Router on page 115
Replacing an MX104 AC Power Supply on page 170
MX104 AC Power Electrical Safety Guidelines and Warnings on page 246
MX104 AC Power Specifications on page 95
Chapter 11: AC Power Specifications
Plug Type Design Standard
498G NEMA 5-15
BS89/13 BS 1363/A
97