Tektronix AFG3000 Series Service Manual page 32

Specifications
Table 1-10: Modulation (cont.)
Characteristics
PM (Phase Modulation)
Carrier waveforms
Modulation source
Internal modulating
waveforms
Internal modulating
frequency
Phase deviation range
FSK (Frequency Shift Keying)
Carrier waveforms
Modulation source
Internal key rate
Number of keys
PWM (Pulse Width Modulation)
Carrier waveforms
Modulation source
Internal modulating
waveforms
Internal modulating
frequency
Deviation range
Sweep
Type
3
Start/stop frequency
AFG3011
AFG3021B, AFG3022B
AFG3101, AFG3102
AFG3251, AFG3252
Sweep/hold/return time
Total sweep time accuracy,
typical
1. The maximum waveform length for Arb is 4,096. Waveform data points over 4,096 are ignored.
2. The maximum waveform length for Arb is 2,048. Waveform data points over 2,048 are ignored.
3. Pulse, DC, and Noise waveforms are not available. Start and stop frequencies depend on the waveform shape.
Total sweep time = Sweep time + Hold time + Return time ≤ 300 s
4.
1-10
Description
Standard waveforms (except Pulse, DC, and Noise) and Arb
Internal or External
Sine, Square, Ramp, Noise, and Arb
2 mHz to 50.00 kHz
0.0 to 180.0 degrees
Standard waveforms (except Pulse, DC, and Noise) and Arb
Internal or External
2 mHz to 1.000 MHz
2
Pulse
Internal or External
Sine, Square, Ramp, Noise, and Arb
2 mHz to 50.00 kHz
0.0% to 50.0% of pulse period
Linear or Logarithmic
1 μHz (except Arb: 1 mHz) to 10 MHz
1 μHz (except Arb: 1 mHz) to 25 MHz
1 μHz (except Arb: 1 mHz) to 100 MHz
1 μHz (except Arb: 1 mHz) to 240 MHz
4
Range: 1 ms to 300 s (sweep time)
0 ms to 300 s (hold/return time)
Resolution: 1 ms or 4 digits
≤ 0.4%
2
2
AFG3000 Series Arbitrary/Function Generators Service Manual