3D Systems ProX 950 User Manual page 40

Removing Bubbles
If bubbles appear in material, they must be removed prior to
starting a print. Follow these steps to remove bubbles:
Navigate to the Tools
1.
Select Remove Bubbles
2.
Wait while bubbles are removed.
3.
When recoater returns to home position print can be
4.
started.
Printing a Part
1. Select the Prints menu (2).
2. Insert USB drive into the port below the touch screen (3). Files
can also be transferred from the application software - Option
1 or 2.
3. All .bff files on drive will pop up on screen. Select file you wish
to print.
4. Tap the Submit button.
5. The file selected should be loaded in the prints queue.
6. If file is not in the top position, tap the file to highlight it, then
tap the Jump to Top
the queue (4).
7. Tap the Play button next to the .bff file desired to print, or wait
for the file print to pop up in the top left corner and then tap
the Play button (5).
8. Wait for the machine to fully print the first layer to ensure that
the print has successfully started. You can see which layer the
machine is printing by looking at the UI.
3D Systems, Inc.
menu.
(1).
button to move the file to the top of
3
40
1
2
4
5