Table of Contents
Advertisement
2.
The Restart Wizard will open.
a.
If the user selects Quick Restart, the old style restart
routine will run. This routine simply homes the elevator (if
necessary) and moves to the last printed layer.
Selecting Settings will bring the
3.
user to the advanced restart
options. The advanced settings
are for experienced users
who want more control when
restarting a failed or interrupted
build.
a.
From here the user may
choose whether or not to
home the elevator, adjust
elevator position, sweep
the applicator, level the
material, add additional
wait time to the current
layer, select a specific layer,
or rescan the selected layer
multiple times.
b.
If the elevator has not been
homed, the user may move
the elevator downward, but
not upward.
c.
If the applicator has not
been homed, the user
cannot move the elevator
up beyond the last known
layer.
RECOAT PARAMETER
MODIFICATIONS ON-THE-FLY
WIZARD
In GUI v1.1.5443, this feature assists with
making mid-build recoat adjustments.
1.
To access this wizard while a
build is in progress, tap the
Recoat Style button.
3D Systems, Inc.
33
Advertisement
Table of Contents
Troubleshooting
