Pairing Gvc3202 With A Bluetooth Device - Grandstream Networks GVC3202 User Manual

PAIRING GVC3202 WITH A BLUETOOTH DEVICE

Before connecting GVC3202 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are manually unpaired. To pair Bluetooth device:
1. On the LCD display device, go to Settings->Network->Bluetooth.
2. Press button on the remote control and select "Search for devices".
3. GVC3202 scans and displays the IDs of all available Bluetooth devices in range. Once the Bluetooth
device shows up in the result, tap on it to start pairing.
4. Confirm the passkey in the prompted message (if any). Or, if passcode is required, please refer to
the device's documentation or contact with the device administrator to obtain the passcode.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
The external speaker provided with GVC3202 is not pre-paired to GVC3202. If the user would like to use
external speaker via Bluetooth connection with GVC3202, the user must pair and connect it to GVC3202
manually before using it for audio output.
--------------------------------------------------------------------------------------------------------------------------------------------
CONNECTING TO A BLUETOOTH DEVICE
After pairing successfully, the device will be connected to GVC3202 immediately. Users will see this
device listed under "Paired Devices". Tap on
"Rename", "Unpair" and etc.
Firmware Version 1.0.0.X
next to the connected device. Users will see options
GVC3202 User Guide Page 34 of 117