Connect Bluetooth From Gvc320X To Gac2500; Figure 6: Pairing Gvc320X With Gac2500 - Grandstream Networks GAC2500 User Manual

4. In Bluetooth settings interface, slide up and tap on icon
5. In the listed discovered devices, find the GVC320x device. The device name should end with the
last 4 digits of MAC address by default.
6. Tap on the device name to pair by select "Pair" on pairing request. Please see the picture below.
There would be a pairing request on GVC320x at the same time displaying the same passkey, so
please also select "Pair" on GVC device after confirmation.
7. After successful pairing, select the GVC320x name again to connect the GVC320x to the GAC2500.
The Bluetooth icon
Note: Once GVC320x is paired with GAC2500, GVC320x will be listed in "Paired Devices" section
on GAC2500 LCD. For devices listed in "Paired Devices", users only need to select them to connect
with any operation on GVC320x.

Connect Bluetooth from GVC320X to GAC2500

1. On GVC320x, please use the GVC remote control to go to GVC320x LCD -> Settings -> Networks->
Bluetooth.
2. Press Menu button
(see figure below). The device name ends with the last 4 digits of MAC address by default.

Figure 6: Pairing GVC320x with GAC2500

will show up on the top status bar.
and select "Search for Devices" to find the GAC2500 with Bluetooth on
How to use GAC2500 with GVC320x Guide
, then select "Search for devices".
P a g e | 6