Grandstream Networks GVC3202 User Manual page 26

Mute/DND
Presentation
Send/Answer/Add
Party Into Conference
End Call/Remove Party
From Conference
Backspace
Navigation Keys:
Up/Down/Left/Right
Power On/Off
Firmware Version 1.0.0.X
 Mute GVC3202 in conference.
 Press the MUTE key to enable/disable DND mode when
GVC3202 is in idle.
 Enable/Disable presentation function to send presentation
to all members in the conference.
 Enable/Disable
presentation on displayed device which is connected to
HDMI output 1 as projection when GVC3202 is in standby
mode.
Access the dial screen by default when GVC3202 is in

idle mode.
 Enter phone number and press the key to dial out.
 Access the invite screen to add members in a conference.
 Press the key to bring out the backstage conference.
 Press the key to redial the last outgoing call.
 Delete members in conference.
 Hang up the conference.
Press the key to delete input characters.
 Press to adjust cursor movement.
 Control PTZ movement in camera mode.
 Press to confirm operations.
OK
 Bring up the soft keypad when the cursor is in an input
box.
LCD prompt shows the following three options after pressing
this key:
 Switch GVC3202 into sleep mode.
 Power Off
 Reboot
GVC3202 User Guide
presentation function
Page 25 of 117
to show