Grandstream Networks GVC3202 User Manual page 56

- The selected party will not hear other parties.
- The video call with the selected party will turn into audio call only. If user clicks on this
icon again, a video invitation will be sent to this party. The party has to accept the
video request in order to see the video again.
- Suspend video from the video party. Click on it again to resume video.
Suspend. It is used to pause/resume conference. Once it is paused, GVC3202 will stop sending
local video to the remote parties.
Presentation. It is used to turn on/off presentation. HDMI IN or VGA IN has to be plugged in first.
More. Bring up more options including mixing video with third party applications (only available
when the application is installed on GVC3202), view call details, set DND, open DTMF, switch
mainstream and sub stream.
End. End conference and go back to home screen.
If the remote party is also using GVC3202, you can press the camera key
control PTZ device for the remote party.
Users could press the red/blue/yellow shortcut keys on the remote control to input DTMF, view
notifications and view status.
During an active conference call, if there is a new member joining conference, an outgoing call failed or a
member hanging up, there will be a prompt box on the left side of the conference screen showing
notifications. The notification prompt will be hidden automatically if there is no new notification in 2
seconds.
On the right side of the video conference screen, users can see member status such as audio/video calls,
or whether if the call is being muted.
Firmware Version 1.0.0.X GVC3202 User Guide
on the remote control to
Page 55 of 117