Starting The Ant-20 Next Software - Wavetek ANT-20 Operating Manual

ANT-20 NEXT
1.2

Starting the ANT-20 NEXT software

Note:
The first time that you start the "ANT-20 NEXT" software on the ANT-20, you must enter the
access code. See under "Starting the ANT-20 NEXT software for the first time" for details.
The "ANT-20 NEXT" software is started as described under "Starting the ANT-20 NEXT
software" if the access code has already been entered.
O-2
• You cannot run the "ANT-20" application (interactive user interface) and the
"ANT-20 NEXT" software at the same time. You also cannot start more than
one "ANT-20 NEXT" software application at a time.
• Please note that you can use the Windows Start menu settings to select
whether the ANT-20 interactive user interface or a selected "ANT-20 NEXT"
software application is started automatically when you start the ANT-20.
• You can test the full functions of the "ANT-20 NEXT" software for a period of
thirty days without entering the access code.
This evaluation period starts when the software is started for the first time. If
you want the evaluation period to start later, use the "Abort" button rather than
the "Start" button to exit from the "ANT-20 NEXT Welcome" window. The "Reg-
ister" button opens a window for entering the access code.
This entry window is not displayed again when the "ANT-20 NEXT" software is
started again.
ANT-20SE
Operating