Configuring Windows Xp Pcs - Motorola NC800 User Manual

Configuring Windows XP PCs

Windows XP introduced a new interface look and feel called the Category View. If you are using the Windows
XP Classic View interface settings, use the following instructions. There is not much difference between the
views except that the dialog boxes, menus and dialog items are drawn slightly different. The content of the
dialog boxes and menus are almost the same. The computer is configured to respond to the Motorola Cellular
Gateway NC800 as a DHCP server as follows.
1. Click on the
2. The Network Connections Screen is displayed.
3. Check that the applicable
applicable Local Area Connection by selecting Enable from the pop-up list.
4. Right click on
the bottom of the pop-up list. This will lead to the Local Area Connection Properties sheet.
5. The Local Area Connection Properties screen is
displayed. Ensure that the Internet Protocol (TCP/IP)
is enabled (the box to the left of it should be checked).
Highlight Internet Protocol (TCP/IP) and click on the
Properties button.
Motorola Cellular Gateway NC800 User Guide Version 2.0
button. Select
for the applicable Ethernet adapter. Choose the Properties entry at
. Double click on
adapter is enabled. If not, right click and Enable the
.
Page 24 of 110