Configuring The Traffic Interfaces - 4RF Aprisa XE User Manual

92 | Configuring the Traffic Interfaces

Configuring the Traffic Interfaces
Important: Before you can configure the traffic interfaces, the interface cards must be already installed
(see 'Installing Interface Cards' on page 235).
Configuring each traffic interface involves the following steps (specific instructions for each interface card
follow this page).
First, specify the port settings for the Remote terminal:
1. Select Remote > Interface > Interface Summary, select the interface card and click Configure
Interface.
2. Select the port you want to configure and modify the settings, as necessary.
3. Click Apply to save the changes you have made.
Now specify the port settings for the Local terminal:
1. Select Local > Interface > Interface Summary, select the interface card and click Configure Interface.
2. Select the port you want to configure and modify the settings, as necessary.
3. Click Apply to save the changes you have made.
Once you have done this, you will need to configure the traffic cross-connects (see 'Configuring the traffic
cross connections' on page 145) for each interface card.
Aprisa XE User Manual