Disabling A User; Deleting A User; Saving User Information - 4RF Aprisa XE User Manual

66 | Managing the Terminal

Disabling a User

1. Select Local or Remote > Maintenance > User Admin > User Table.
2. Select the user who you want to disable.
3. Click Edit to display the User details and set Enabled to 'No'.
4. When you have made your changes, click Apply to apply changes or Reset to restore the previous
configuration.
Note: For the changes to take effect, you must reboot the terminal (Local > Maintenance > Reboot).

Deleting a User

1. Select Local or Remote > Maintenance > User Admin > User Table.
2. Select the user you want to delete.
3. Click Edit to display the user details and delete the User Name and Password.
4. Reset the Group to 'View' and set Enabled to 'no'.
5. When you have made your changes, click Apply to apply changes or Reset to restore the previous
configuration.
Note: For the changes to take effect, you must reboot the terminal (Local > Maintenance > Reboot).

Saving User Information

You can save the list of users to your PC and then load this file to another terminal. This is useful if you
have multiple terminals to configure.
To save the user table to file:
1. Select Local > Maintenance > User Admin > Save User List.
2. Select the 'Save to disk' option in the dialog box that appears.
3. In the next dialog box that appears, navigate to the directory where you want to save the file, enter a
suitable filename, and then click Save (The default name for this file is 'downloadUsers').
Note: If this dialog box does not appear, change your Internet security settings to allow downloads.
You may also need to check your file download location setting.
To save the file to another terminal:
1. Select Local > Maintenance > User Admin > Load User List.
2. On the Upload Users page, select Browse and navigate to the file on your PC.
3. Click Apply.
The User Table appears and you can edit users, as required.
Aprisa XE User Manual