4RF Aprisa XE User Manual page 4

2 |
Compliance General
The Aprisa XE digital radio predominantly operates within frequency bands that require a site license be
issued by the radio regulatory authority with jurisdiction over the territory in which the equipment is
being operated.
It is the responsibility of the user, before operating the equipment, to ensure that where required the
appropriate license has been granted and all conditions attendant to that license have been met.
Changes or modifications not approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Equipment authorizations sought by 4RF Limited are based on the Aprisa XE radio equipment being
installed at a fixed location and operated in a continuous point-to-point mode within the environmental
profile defined by EN 300 019, Class 3.2. Operation outside these criteria may invalidate the
authorizations and / or license conditions.
The term 'Terminal' with reference to the Aprisa XE User Manual, is a generic term for one end of a fixed
point-to-point Aprisa XE link and does not confer any rights to connect to any public network or to operate
the equipment within any territory.
Compliance ETSI
The Aprisa XE radio terminal is designed to comply with the European Telecommunications Standards
Institute (ETSI) specifications as follows:
Radio performance
EMC
Environmental
Safety
An Aprisa XE radio terminal operating in the following frequency bands / channel sizes
has been tested and is compliant to the ETSI radio specifications and suitably displays
the CE logo.
Other bands are compliant to the same radio performance specifications as adapted by
4RF Limited and therefore may be used in regions where compliance requirements
demand CE performance at other frequencies.
Frequency band
300 MHz
400 MHz
600 MHz
700 MHz
800 MHz
900 MHz
1400 MHz
1800 MHz
2000 MHz
2500 MHz
EN 302 217 Parts 1, 2.1, and 2.2
EN 301 489 Parts 1 & 4
EN 300 019, Class 3.2
EN 60950
Channel size
25 kHz, 50 kHz, 75 kHz, 125 kHz,
150 kHz, 250 kHz, 500 kHz,
1.0 MHz, 1.75 MHz, 3.50 MHz
500 kHz
75 kHz, 150 kHz, 250 kHz,
500 kHz, 1.0 MHz, 1.75 MHz,
3.50 MHz, 7 MHz
250 kHz, 500 kHz, 1.0 MHz,
1.75 MHz, 3.50 MHz, 7 MHz,
14 MHz
Aprisa XE User Manual
Power input
12 VDC, 24 VDC,
48 VDC, 115/230 VAC
12 VDC, 24 VDC,
48 VDC, 115/230 VAC
12 VDC, 12 VDC LP,
24 VDC, 48 VDC,
115/230 VAC
12 VDC, 24 VDC,
48 VDC, 115/230 VAC
Notified
body
Notified
Body 0678
Notified
Body 0678