Hinging The Rudder - Seagull Models SEA238 Assembly Manual

Epoxy.
Glue the elevator hinges in place using the
same techniques used to hing the ailerons.

HINGING THE RUDDER.

Glue the top two rudder hinges in place
using the same techniques used to hinge
the ailerons.
The lower hinge will be glued when the
fin/rudder assembly is attached to the fu-
selage.
WWW.SEAGULLMODELS.COM
INSTALL THE AILERONS
CONTROL HORN.
Fiberglass control horn
Aileron control horn.
INSTALL ELEVATOR CONTROL HORN.
Fiberglass control horn
Epoxy.
Epoxy.
5