Step 9: Option A - Connecting Ductwork - Insignia NS-OTR16SS8Q Installation Manual

Step 9: Option A - Connecting ductwork

1 Open the cabinet and slide the exhaust adapter front-to-back or side-to-side to adjust.
2 Extend the house duct down to connect to the exhaust adapter.
3 Seal the exhaust duct joints with duct tape.
4 You're finished! Skip to
You'll need:
House duct
"Before using your microwave" on page
Duct tape
www.insigniaproducts.com
1.6 Cu. Ft. Over-the-Range Microwave
Blower plate
Exhuast adapter
Damper
Back of microwave
40.
21