Before you install
Read these instructions completely before installing your microwave. Make sure that your space meets the
mounting requirements and that you've gathered all needed tools and materials.
Tools and materials needed
Ducts (if venting outside)
See
"Exhaust requirements" on page 7
Filler blocks or scrap wood pieces
(for top cabinet spacing in recessed bottom
cabinet installations, if needed)
#1 and #2 Phillips screwdrivers
Edge-to-edge stud finder
Ruler or tape measure
Pencil
Carpenter square
(optional)
www.insigniaproducts.com
1.6 Cu. Ft. Over-the-Range Microwave
Level
Duct tape
Electric drill with 3/16", 1/2", and 5/8" bits
Saw
(saber, hole, or keyhole)
Tin snips
(to cut damper, if needed)
Scissors
(to cut template, if needed)
Gloves
Safety goggles
5