Installing Your Microwave; Step 1: Find The Wall Studs - Insignia NS-OTR16SS8Q Installation Manual

Installing your microwave

Step 1: Find the wall studs

1 Using an edge-to-edge stud finder, locate the edges of the wall stud(s) within the opening.
2 Mark the center of each stud, and then draw a vertical line down the center of each stud.
You'll need:
Edge-to-edge stud finder
10
Warning
Your microwave must be connected to at least one wall stud.
Warning
The center of any adjacent wall studs should be 16" or 24" from this mark.
Center of the
wall stud
Ruler or tape measure
www.insigniaproducts.com
Wall
stud
NS-OTR16SS8Q
Pencil