11 If you have recessed cabinets:
•
Make two filler blocks out of scrap wood pieces the size of shaded areas G and H. They must be as thick as
the depth of the cabinet recess.
•
Drill 5/8" holes in the filler blocks to align with points D and E.
•
Align the blocks with the corresponding holes in the cabinet. They should be at the same level as the
bottom edge of the cabinet frame.
Filler blocks
You'll need:
Electric drill with 1/2" and 5/8"
bits
Ruler or tape measure
Duct tape
(recessed cabinets only)
Saw
(saber, hole, or keyhole)
Top Cabinet Template
www.insigniaproducts.com
1.6 Cu. Ft. Over-the-Range Microwave
Safety goggles
Scissors
Filler blocks or scrap wood pieces
(for recessed cabinets only)
17