Mounting Requirements - Insignia NS-OTR16SS8Q Installation Manual

Mounting requirements

• The space between the cabinets must be 30 in. (76.2 cm) wide. If the space between the cabinets is more than 30
in. (76.2 cm), you'll need filler material to fill the gap between the microwave and cabinets.
• This microwave is for installation over ranges up to 36 in. (91.4 cm) wide.
• If installing the microwave beneath smooth, flat cabinets, make sure that you leave enough space for the power
cord clearance.
• If you are going to vent your exhaust to the outside, see
preparation.
66 in. (167.6 cm) or more
from the floor to the top of
the microwave
6
16-1/2 in.
(41.9 cm)
2 in. (5.1 cm)
www.insigniaproducts.com
"Exhaust requirements" on page 7
30 in.
(76.2 cm)
NS-OTR16SS8Q
for exhaust duct