Step 8: Option A - Connecting Ductwork - Insignia NS-OTRC15SS9 Installation Manual

Step 8: Option A - Connecting ductwork

1 Open the cabinet and slide the exhaust adapter front-to-back or side-to-side to adjust.
2 Extend the house duct down to connect to the exhaust adapter.
3 Seal the exhaust duct joints with duct tape.
4 You're finished! Skip to "Before using your microwave" on page 38.
You'll need:
House duct
Duct tape
www.insigniaproducts.com
Blower plate
Exhaust adapter
Damper
Back of microwave
NS-OTRC15SS9
21