Step 4: Option B - Cutting A Vent Opening - Insignia NS-OTR16SS8Q Installation Manual

Step 4: Option B - Cutting a vent opening

1 Use a saber or keyhole saw to cut out the shaded area K through the rear wall.
2 Remove the rear wall template.
You'll need:
22
Note
If a wall stud is within 6 in. (15.2 cm) of the vertical center line, you cannot use this
installation option.
Saw
Saw
(saber, hole, or keyhole)
www.insigniaproducts.com
NS-OTR16SS8Q