Table of Contents
Advertisement
5 Insert wood screw(s) through the mounting plate and into the hole(s) drilled in the stud(s), then tighten both the
wood screw(s) and toggle bolt(s) with a Phillips screwdriver to mount the plate. Make sure that the plate is
centered before tightening fully.
You'll need:
Toggle bolts
Caution
Be careful to avoid pinching your fingers between the back of the mounting plate
and the wall.
Toggle bolt
Toggle wing
Wall
Mounting plate
Wood screws
Mounting plate (Qty. 1)
(ships attached to microwave)
www.insigniaproducts.com
1.6 Cu. Ft. Over-the-Range Microwave
Phillips screwdrivers
33
Hide quick links:
Advertisement
Table of Contents
