Remote Electronics Installation - Emerson Rosemount Oxymitter 4000 Instruction Manual

Instruction Manual
IM-106-340, Rev. 4.3
July 2017
Figure 3-7. Orienting the Optional Vee Deflector
Remote Electronics
Installation
Uninsulated stacks or ducts may cause ambient temperatures around the electronics to
exceed 185°F (85°C), which may cause overheating da mage to the electronics.
8. If insulation is being removed to access the duct work for Oxymitter
4000 mounting, make sure the insulation is replaced afterward
(Figure 3-8).
For an Oxymitter 4000 equipped with remote electronics, install the probe
according to the instructions in "Probe Installation". Install the remote
electronics unit on a stand pipe or similar structure, Figure 3-2.
Oxymitter 4000
3-9