Hart Handheld 375 Communicator - Emerson Rosemount Oxymitter 4000 Instruction Manual

Instruction Manual
IM-106-340, Rev. 4.3
July 2017
Section 11
HART HANDHELD 375
COMMUNICATOR
Figure 11-1. HART Model 375
Handheld Communicator
Optional Accessories
HART Handheld 375 Communicator . . . . . . . . . . . . . . . . . page 11-1
Asset Management Solutions (AMS) . . . . . . . . . . . . . . . . page 11-2
By-Pass Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-2
IMPS 4000 Intelligent Multiprobe Test Gas Sequencer . . page 11-3
SPS 4001B Single Probe Autocalibration Sequencer . . . page 11-4
O Calibration Gas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-5
2
Catalyst Regeneration . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11-6
The HART Handheld 275/375 Communicator is an interface device that
provides a common communication link to HART-compatible instruments,
such as the Oxymitter 4000. HART Communications Protocol permits all the
information available from the Oxymitter 4000's electronics to be transmitted
over standard 4-20 mA signal wires. By attaching the HART handheld
communicator at a termination point along the 4-20 mA signal line, a
technician can diagnose problems and configure and calibrate the Oxymitter
4000 as if he or she were standing in front of the instrument.
For more information, call Emerson at 1-800-433-6076.
Oxymitter 4000