The Front Plate; The Rear Plate - Advantech EBPC-5250 User Manual

4.1

The Front Plate

The front panel has a built-in Line-in jack, a Line-out jack, a Mic-in jack, a Mini DIN
PS/2 mouse connector, a Mini DIN PS/2 keyboard connector, four COM ports, a par-
allel port, a GPIO port, a VGA port, four USB ports, a 10/100 LAN port and a Giga
LAN port with 'link' & 'activity' LED indicators. The GigaLAN port on the lower right
corner is specifically for PCM-9581FG/9582FG/9584 series of biscuit SBC. If users
use other 958X series SBCs, there is a cap to cover this port. The front plate also
reserves openings to support a DVI, four 9-pin D-SUB, and four USB ports for extra
needs. The LEDs indicate the power on/off and the hard disk drive activity. When the
system power is on, the POWER LED is always Green. When the HDD LED is blink-
ing Red, it means the HDD is transmitting data.
4.2

The Rear Plate

The rear plate is pre-punched with openings to support two LVDS connectors, a DVI
port, an S-Video and a C-Video port for the optional display module kit. The momen-
tary ATX power switch is placed on the rear side to prevent it from being touched by
accident.
EBPC-5250 User Manual
MOUSE
LINE IN
COM1 COM3
LINE OUT
MIC
COM2 COM4
K/B
Figure 4.1 Front plate
Figure 4.2 Rear plate
LAN 1
PRINTER
GPIO VGA
USB1 USB3
USB2 USB4
22
PWR HDD
LAN 2