2.5
Installing the Disk Drives
The EBPC-5250 comes with a shockproof housing for an internal 3.5" HDD. It also
reserves space for a slim type optical disk drive. Please refer to the following instruc-
tions to install the 3.5" hard disk drive and the optical disk drive.
2.5.1
Installing a 3.5" Hard Disk Drive
1.
To install the 3.5" internal HDD, remove the disk drive bracket by releasing the
four screws (with the rubber cushions) from outside the chassis (see Figure
2.6).
2.
Insert the disk drive into the proper bracket location and secure it with the
screws provided.
3.
Return the disk drive bracket with the 3.5" HDD to the original position and fas-
ten it with the four screws.
4.
Connect the IDE flat cable from the SBC; and plug in the power connector from
the power supply.
EBPC-5250 User Manual
Figure 2.6 Installing a 3.5" HDD
10