Removing The Top Cover - Advantech EBPC-5250 User Manual

The following procedures will instruct you how to install a 5.25" SBC, riser card, add-
on cards, and disk drive into the chassis.
Note! Use caution when installing or operating the components with the chas-
sis open. Be sure to turn off the power, unplug the power cord and
ground yourself by touching the metal chassis before you handle any
components inside the machine.
2.1

Removing the Top Cover

To remove the top cover, please follow the instructions below:
1. Loosen two screws on the rear of the top cover.
2. Pull the top cover backwards and then lift it up. (see Figure 2.1)
EBPC-5250 User Manual
Figure 2.1 Removing the top cover
6