Instructions For Replacing The Lamps; Low Pressure Lamps - ergoline INSPIRATION 400 TWIN POWER Operating Instructions Manual

Cleaning and maintenance
48
The assembly is the same process in reverse order.
5.8

Instructions for replacing the lamps

The UV effect of the lamps and thus the tanning effect decreases over the
course of time. Therefore, the replacement intervals specified in the mainte-
nance plan must be adhered to.
UV filters are utilized in order to control the UV radiation, e.g. the filter panels
on the facial tanner. However, the filter effect decreases over the course of
time. Therefore, the replacement intervals specified in the maintenance plan
must be adhered to.
5.8.1

Low pressure lamps

Replace faulty UV low pressure lamps immediately.
Always replace the entire set of lamps after the specified operating time.
– Turn 90° and carefully remove from the socket.
– UV low pressure lamps possess a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.