Instructions For Replacing The Lamps; Low Pressure Lamps - ergoline BALANCE 440 HYBRID T OLOGY Operating Instructions Manual

Cleaning and maintenance
36/54
5.8

Instructions for replacing the lamps

DANGER!
UV radiation!
The lamps' effect decreases over the course of time. Danger
of skin and eye injuries or skin diseases!
– As such, the replacement intervals specified in the
maintenance plan must be adhered to.
5.8.1

Low pressure lamps

Replace faulty UV low pressure lamps immediately.

Always replace the entire set of lamps after the specified operating time.

– Turn 90° and carefully remove from the socket.
– UV and Beauty Light lamps have a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.
– Push the pins vertically into the socket from above.
– When fitting the lamps, ensure that they are in the correct sequence.
NOTE:
The UV low pressure lamps do not fit in the coded lamp
sockets.
Non coded socket: Coded socket: