Faults; Cleaning - ergoline Beauty Angel 7200 Operating Instructions Manual

Cleaning and maintenance
40/68
4.2

Faults

Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.

If several errors occur, the error messages are displayed alternately.

Error elimination is acknowledged by pressing the START/STOP-button.

If the error cannot be cleared, inform Customer Service - see page 2.

More detailed information regarding the error description and solutions is
available in 'Error Codes' (order no. 1019969-..).
4.3

Cleaning

DANGER!
Infections can be spread by skin contact!
All objects/device parts, which can come into contact with
the user during the application, must be disinfected after
every application:
– Handles and control panel
– Protective goggles
– AUX cable
– Acrylic glass panels
– complete base plate including foot mat (silicone)
DANGER!
Risk of crushing during the cleaning/disinfecting of
base plate and vibration plate!
Between the base plate and the vibration plate is a small
gap, which can lead to crushing of the fingers.
– Do not put your fingers into the gap when cleaning.
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.