Gabarron ECOHHR20 Advanced Installation Instructions page 4

3.- Screw on the wall the superior fixing fitting, making the two required drills at the recommended distance depending on the
model.
Use the dowels and screws contained in the plastic bag to fix the fitting to the wall.
4. - Fix the lateral fittings to the metal structure by using the appropriate screws. The supply cables must be fitted but not wired
to the storage heater before placing the heater to the wall. Remove the white screws located in the top of ECOHHR, and place
the ECOHHR in the selected installation area. Use the removed screws to attach ECOHHR to the superior fixing fitting installed
in the wall.
5. – Take off the front outlet grill by removing the four screws. Take off the front panel by removing the two screws located at
the bottom.



ECOHHR MUST NOT BE HUNG ON THE SCREWS; these are used
only to prevent the device from overturning and not to support it. If
there is any doubt concerning the wall strength, consult the
corresponding construction specialist. The appliances are heavy; it is
the installer responsibility the correct installation and wall support of
these devices to prevent them from overturning.
3