Connection / Disconnection; Keyboard Lock; Operating Instructions - Gabarron ECOHHR20 Advanced Installation Instructions

3. - OPERATING INSTRUCTIONS

CAUTION: DO NOT USE THIS HEATER TO DRY CLOTHES. Do not cover this heater at any time.

3.1. CONNECTION / DISCONNECTION

Power switch.All models are equipped with a switch on the
back side panel. It is used to connect and disconnect HHR.
3.2. KEYBOARD:
"Sun" key:
Press the key to set up the
value of Comfort
Temperature.
Key "-":
Press the key to decrease
different values.
Press "-" and "Sun" keys simultaneosly to view the current time settings.
Hold "-" and "Sun" keys pressed simultaneosly for several seconds to set up the system time settings.
Press "+" and "Moon" keys to set up the weekly programming.

3.3. KEYBOARD LOCK:

In any operation mode, it is possible to lock the keyboard holding the keys
When the keyboard is locked, if any button is pressed, display will show
To unlock the keyboard, hold the keys
3.4. SYSTEM TIME SETTING
It is necessary to set the system time for the appliance to follow correct programming and to adjust it correctly to the off peak
time periods. Off peak periods have to fit with the ones established in GENERAL SETTINGS part as P01, P02, P03, and P04
(please go to "General Settings").
To set the system time, hold the key
changed with the and
Then press the key to save and proceed to change the hour value. Blinking hour will be displayed. Use
keys to set the hour value.
Press the key to save and proceed to change the minute value. Save the time settings pressing
HHR does not change automatically from summer time to winter time or vice versa. Depending on the
i
tariff, it may be necessary to change the clock settings to fit these two timings.
simultaneously again for 3 seconds.
for 3 seconds ("Sun" & "-" keys). Blinking day will be displayed. The Day value is
keys.
and
and the appliance will not respond
7
"Moon" key:
Press the key to set up the value of
Eco Temperature.
Press the key to confirm actions in
several menus.
Key "+":
Press the key to increase
different values.
simultaneously for 3 seconds.
and
key.
.