Advertisement
Quick Links
Advertisement
Related Manuals for Gabarron Ecombi HHR Series
Summary of Contents for Gabarron Ecombi HHR Series
-
Page 2: Connection And Disconnection
User Operating Instructions Connection and Disconnection Each ECOHHR storage heaters has its own power switch and is located on the right side panel. The power switch is used to turn the heater ON and OFF. If this switch is turned OFF then the storage heater will not take a charge when the off peak supply is on and will not give out any heat. -
Page 3: Setting The Day/Time
User Operating Instructions Setting the Day/Time The ECOHHR storage heater has been preset with the Day and Time however you will need to adjust this with summer and winter times (when the clocks go forward and back). To check the Day and Time on your ECOHHR storage heater follow these steps. - Page 4 User Operating Instructions Setting the Comfort Temperature Level The ECOHHR storage heater has been preset with a Comfort temperature level of 21°C. To increase or decrease the Comfort temperature level please follow these steps. Press and Release the sun (comfort) button.
-
Page 5: Setting The Weekly Program
User Operating Instructions Default Weekly Program Default weekly program set for all 7 days. The ECOHHR storage heater has been preset with an economical weekly program designed to give the best efficiencies and is based on the following times. From 00:00 till 07:00am the program runs in economy mode at 18°C, from 07:00am till 09:00am the program runs at the Comfort temperature of 21°C, from 09:00am till 17:00pm the program will run in economy mode at 18°C,... - Page 6 User Operating Instructions Setting the Weekly Program - continued If you wish to change the temperature level from Noon (Economy) to Sun(Comfort) for this 30 minute segment 00:30 to 01:00 then Press the sun (comfort) button. The display will now flash between the time interval 00:30 and Sun(Comfort).
- Page 7 User Operating Instructions Economy Mode Override Function At some point you may wish to temporally override your current running program from Economy to the Comfort temperature. To override the Economy Mode you’ll need to follow these steps. Press and Hold the sun (comfort) button until the word Sun is displayed.
- Page 8 User Operating Instructions ECOHHR Current Status Function The ECOHHR has a function that allows you check the current status of the heater. This function allows you to see what temperature the heater is currently measuring the room to be, the current core temperature, the air temperature at the grille, the percentage of charge the heater tried to take last period and how long the balancing element has been used for during the last on peak time.