Gabarron ECOHHR20 Advanced Installation Instructions page 6

9. - Place the heating elements back into their original position. Place the second row of storage bricks with the flat side facing
out and always on the heating elements supporting tabs.
Next replace the metallic plate in the top of the storage core, between the bricks and the Microthermal insulation panel with the
flat side facing up. It must be placed in the right position for the fan to work correctly.
10. - Place the second row of storage bricks with the flat side facing out.
11. - Replace the inner front panel. If the bricks have been fitted correctly you will have no difficulty in replacing the panel. Make
sure the bottom edge of the inner panel is inside the front lip of the heater. Please see below:
12. - Replace the front panel with screws. When replacing the exterior front panel, align the 2 plastic upper pegs on the heater
with the holes in the exterior panel. Push the top up into place and push the bottom and fix the panel with the removed screws.
13. - Replace the front outlet grill with the screws.
RIGHT
POSITION
5
WRONG
POSITION