Appendix; Appendix A: Enclosure; Appendix B: Maintenance, Cleaning And Repairing - Aktakom ADS2061 User Manual

9. Appendix

Appendix A: Enclosure

Standard Accessories:
2 Passive probe: 1.2 m, 1:1 (10:1)

CD: x 1 (PC link application software)

Power cord: 1pcs, up to the standards of the country in which it is used.

USB cable

User Manual: 1pcs

Options:
Battery


Appendix B: Maintenance, Cleaning and Repairing

General Maintenance
Please don't store or put the instrument in the place where the liquid crystal display
will be directly exposed to the sunlight for a long time.
Caution: The instrument or probe should not be stained with the spraying agent,
liquid and solvent to avoid any damage to it.
Cleaning
Check the probe and instrument regularly according to their operating state. Clean the
external surface of the instrument following the steps shown below:
1. Please wipe the dust from the instrument and probe surface with a soft cloth. Do
not make any scuffing on the transparent LCD protection screen when clean the
LCD screen.
2. Clean the instrument with a wet soft cloth not dripping water, during the period
of which please pay attention to the disconnection of power. It is recommended to
scrub with soft detergent or fresh water. Please don't apply any corrosive
chemical cleaning agent to prevent the instrument or probe from damage.
Warning: Before power on again for operation, it is required to confirm that
the instrument has already been dried completely, avoiding any
electrical short circuit or bodily injury resulting form the moisture.
87 User Manual of Smart Digital Storage Oscilloscope