Mode
Wave
If you want to measure the two-channel signal, you can do as the follows:
1. Press Autoscale button, the function menu will appear.
2. Press
to choose
H1
3. Press H2 and choose
4. Press H3 and choose
Then the wave is displayed in the screen, shown as Fig.5-57.
Fig.5-57 Autoscale Horizontal- Vertical multi-period waveforms
Note:
1. Entering into Autoscale function
screen. (flicker every 0.5 second)
2. In the mode of Autoscale, the oscilloscope can self-estimate "Trigger Type"
(Single, and Alternate) and "mode" (Edge, Video). At this point, the trigger menu
is not available.
User Manual of Smart Digital Storage Oscilloscope
Follow-up and adjust the vertical and horizontal
settings.
Follow-up and adjust horizontal scale without changing
vertical setting.
Follow-up and adjust vertical scale without changing
horizontal setting.
Show Multi-period waveforms.
Only show one or two periods.
ON.
for Mode item.
for Wave item.
and the
○
A flicker will be at the top left of the
68