Aktakom ADS2061 User Manual page 44

Polarity
when
Auto
Mode
Holdoff
Holdoff
Reset
4. Alternate trigger (Trigger Mode: Slope )
Alternate trigger (Trigger Type: Slope) Menu is shown as Fig.5-24.
Fig.5-24 Alternate trigger (Trigger Type: Slope ) Menu
Alternate trigger (Trigger Type: Slope) menu list:
MENU SETTING
Alternate
Slope
Mode
CH1
Source
CH2
slope
When
High level
Threshold Low level
Slew rate
Auto
Mode
Holdoff
Holdoff
Reset
Term interpretation
1. Source: Trigger can occur from several sources: Input channels (CH1, CH2), AC
Line, Ext, Ext/5.
 Input: It is the most commonly used trigger source. The channel will work when
User Manual of Smart Digital Storage Oscilloscope
frequency portion pass.
Choose the polarity
Select pulse width condition and turn the M knob to
set time.
Acquire waveform even no trigger occurred
100ns~10s, adjust M knob to set time interval before
another trigger occur.
Set Holdoff time as 100ns
INSTRUCTION
Set vertical channel trigger type as slope trigger.
Select CH1 as the trigger source.
Select CH2 as the trigger source.
Select slope condition
Set slope condition, turn the M knob to set time.
Turn M knob to set the
Turn M knob to set
Slew rate=(
High level- Low level)/ Settings
Acquire waveform even no trigger occurred
100ns~10s, adjust the M knob to set time interval
before another trigger occur.
Set Holdoff time as 100ns
High level
Low level
40