Taking the additive operation between Channel 1 and Channels 2 for example, the
operation steps are as follows:
1. Press the Math button and call out the Wfm Math menu.
2.
Press the H1 button and call out the Dual Wfm Math menu. The menu will
display at the left of the screen.
3.
Press the F1 menu selection button and choose CH1 for Factor1.
4. Press the F2 menu selection button and choose +.
5.
Press the F3 menu selection button and choose CH2 for Factor2. The green
calculated waveform M is displayed in the screen.
Fig. 5-7 Waveform resulted from CH1 +CH2 Mathematical Manipulation
User Manual of Smart Digital Storage Oscilloscope
CH2
Rectangle
Blackman
Window
Hanning
Hamming
dB
Format
Vrms
×1
×2
Zoom
×5
×10
Select CH2 as FFT source.
Select window for FFT.
Select dB for Format.
Select Vrms for Format.
Set multiple ×1.
Set multiple ×2.
Set multiple ×5.
Set multiple ×10.
26