Application Of Vertical Position And Volts/Div Knobs; How To Set The Horizontal System - Aktakom ADS2061 User Manual

Application of VERTICAL POSITION and VOLTS/DIV Knobs

1. The VERTIVAL POSITION knob is used to adjust the vertical positions of the
waveforms of all Channels (including those resulted from the mathematical
operation).
The analytic resolution of this control knob changes with the vertical division.
2. The VOLTS/DIV knob is used to regulate the vertical resolution of the wave
forms of all channels (including those obtained from the mathematical
manipulation), which can determine the sensitivity of the vertical division with
the sequence of 1-2-5. The vertical sensitivity goes up when the knob is rotated
clockwise and goes down when the knob is rotated anticlockwise.
3. When the vertical position of the channel waveform is adjusted, the screen shows
the information concerning the vertical position at the lower left corner (see
Fig.5-12).

How to Set the Horizontal System

The HORIZONTAL CONTROLS includes the HORIZ MENU button and such
knobs as HORIZONTAL POSITION and SEC/DIV.
1. HORIZONTAL POSITION knob: this knob is used to adjust the horizontal
positions of all channels (include those obtained from the mathematical
manipulation), the analytic resolution of which changes with the time base.
2. SEC/DIV knob: it is used to set the horizontal scale factor for setting the main
31
Fig. 5-12 Information about Vertical Position
User Manual of Smart Digital Storage Oscilloscope