Related Manuals for Aktakom ACT-1210
Summary of Contents for Aktakom ACT-1210
- Page 1 3 IN 1 STUD/METAL/AC VOLTAGE FINDER WITH LASER LINE LEVEL ACT-1210 User’s Manual www.tmatlantic.com...
-
Page 2: Features And Benefits
Features and Benefits ● Stud/Metal/AC wire detection ● Wood, metal and live wire detection-detects wood up to 3/4” depth ● Locate with audio LCD indication ● Normal scan 3/4” & deep scan 1-1/2” selection ● 180” pivoting laser plane with level and plumb vials ●... -
Page 3: Operating Instructions
Operating Instructions Battery Replacement Open the battery door on back of unit and connect a 9-volt battery to clip. Place battery back into case and snap battery door on. Recommended to replace with a new 9-volt battery when low battery indicator is on. Calibration Calibrate the unit on wall before scanning for wood or metal stud. -
Page 4: Specifications
walls will not be detected. Always turn AC power off when working near wiring. The unit is designed to detect 110 volts (for USA version) and 230 volts for (European version) AC in live electrical wires. It will also detect the presence of live wires having greater than 230 volts. Adjustment Feet The adjustment feet allow the leveling of the Laser line on the horizontal or vertical surfaces.