Rear Panel - Aktakom ADS2061 User Manual

the oscilloscope regarded as "Host equipment". For example: upgrading software by
USB flash disk needs to use this port.
2. USB Device port: It is used to transfer data when external USB equipment connects to
the oscilloscope regarded as "Device equipment". For example: to use this port when
connect PC to the oscilloscope by USB.
3. COM / VGA port: To connect the oscilloscope with external equipment as serial port,
or to connect the oscilloscope with a monitor or a projector as VGA output.
4. LAN (function reserved)

Rear Panel

1. The port of trigger signal output & Pass/Fail output
2. Handle
3. Air vents
4. Foot stool (can adjust the tilt angle of the oscilloscope)
5. Ground connection
User Manual of Smart Digital Storage Oscilloscope
Fig. 4-4 Rear Panel
8