Technical Specifications - Aktakom ADS2061 User Manual

8. Technical Specifications

Unless otherwise specified, the technical specifications applied are applicable to the
probe with the attenuation switch setting 10X and the SDS series digital oscilloscope.
Only if the oscilloscope fulfill the following two conditions at first, can these
specification standards be reached.
 This instrument should run for more than 30 minutes continuously under the
specified operating temperature.
 If the change range of the operating temperature is up to or exceeds 5℃, open the
system function menu and execute the "Auto-calibration" procedure (see "How to
Implement Auto-calibration" on P16).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Performance Characteristics
Bandwidth
Channel
Acquisition
Input
Horizontal
System
User Manual of Smart Digital Storage Oscilloscope
Mode
Sample rate
(real time)
Input coupling
Input impedance
Probe attenuation
factor
Max. input voltage
Bandwidth limit
Channel isolation
Time delay between
channel(typical)
Sampling rate range
Instruction
ADS2061
2 + 1 (External)
Normal, Peak detect, Averaging
500MS/s
ADS2061
(250MS/s for dual channels)
DC, AC , Ground
1MΩ±2%，in parallel with 10pF±5pF
1X，10X，100X，1000X
400V (PK-PK) （DC + AC PK-PK）
20MHz, full bandwidth
50Hz: 100 : 1
10MHz: 40 : 1
0.5S/s~500MS/s single channel*
ADS2061
0.5S/s~250MS/s dual channel
60MHz
150ps
82