Aktakom ADS2061 User Manual page 51

XY Format
This format is only applicable to Channel 1 and Channel 2. After the XY display
format is selected, Channel 1 is displayed in the horizontal axis and Channel 2 in
the vertical axis; the oscilloscope is set in the un-triggered sample mode: the data
are displayed as bright spots and the sampling rate is 1MS/s and cannot be
changed.
The operations of all control knobs are as follows:
 The Vertical VOLTS/DIV and the VERTICAL POSITION knobs of
Channel 1 are used to set the horizontal scale and position.
 The Vertical VOLTS/DIV and the VERTICAL POSITION knobs of
Channel 2 are used to set the vertical scale and position continuously.
The following functions cannot work in the XY Format:
 Reference or digital wave form
 Cursor
 Time base control
 Trigger control
 FFT
Operation steps:
1. Press the Display button and call out the Display Set Menu.
47
Fig.5-32 Infinite Persistence Display
User Manual of Smart Digital Storage Oscilloscope