How To Record/Playback Waveforms - Aktakom ADS2061 User Manual

How to Record/Playback Waveforms

Wave Record function can record the input current wave. You can set the interval
between recorded frames in the range of 1ms~1000s.The max frame number reaches
1000,and you can get better analysis effect with playback and storage function.
Wave Record contains four modes: OFF, Record, Playback and Storage.
Record: To record wave according to the interval until it reaches the end frame set.
Record menu shows as follows:
Menu Setting
Mode
Playback
Storage
End frame Turn the M knob to select the number of frames to
Record mode
Frame Set
Interval
Refresh
Operate
Note:
Both of the waveforms of Channel 1 and Channel 2 will be recorded. If a Channel is
turned off while recording, the waveform of the channel is invalid in the playback
mode.
51
Fig.5-35 Wave Saving
OFF Close wave record function
Record Set record menu
Set playback menu
Set storage menu
record (1～1000)
Turn the M knob to select the interval between
recorded frames (1ms～1000s)
ON Refresh wave during recording
OFF Stop refreshing
Play Begin to record
Stop Stop recording
User Manual of Smart Digital Storage Oscilloscope
Instruction