Aktakom ADS2061 User Manual page 49

The description of the Display Set Menu is shown as follows:
Function Menu
Type
Time
Persist
XY Mode
Cymometer
VGA Disp
Display Type: With the F1 menu selection button pushed down, you can shift
between Vect and Dots types. The differences between the two display types can
be observed through the comparison between Fig.5-30 and Fig.5-31.
45
Setting Description
Dots Only the sampling points are displayed.
Vect The space between the adjacent sampling points
in the display is filled with the vector form.
OFF
1 second
2 seconds Turn the M knob to set the persistence time
5 seconds
Infinity
Clear Clear the persistence
ON Turn on the XY display function;
OFF Turn off the XY display function.
ON Turn on the cymometer ;
OFF Turn off the cymometer.
Connect the VGA port to a monitor. If set it as
ON
ON, the waveform could be displayed on the
OFF
computer monitor.
Fig.5-30 Display in the Vector Form
User Manual of Smart Digital Storage Oscilloscope