ABB RET670 Commissioning Manual page 57

1MRK 504 165-UUS -
Transformer protection RET670 2.2 ANSI
Commissioning manual
IEC13000060 V1 EN
Figure 6: Select the TCP/IPv4 protocol and open Properties
5. Select Use the following IP address and define IP address and Subnet mask if the
front port is used and if the IP address is not set to be obtained automatically by the
IED, see Figure 7. The IP address must be different from the IP address chosen for the
IED.
IEC13000060-1-en.vsd
Section 4
Starting up
51