Setting Gps Antenna Position - Furuno FA-150 Installation Manual

3.2 Setting GPS Antenna Position

1. Open the INITIAL SETTINGS window, referring to the previous page.
2. Press or key to choose SET INT ANT POS. and press the [ENT] key.
3. Press the [ENT] key again.
4. Enter distance for location "A" of FA-150 GPS antenna by using the cursor pad
and press the [ENT] key.
A: Distance from bow to GPS antenna position, setting range: 0-511 m
5. Press the [ENT] key and enter distance for location B, C and D similar to how
you did for "A" above.
B: Distance from stern to GPS antenna position, setting range: 0-511 m
C: Distance from port to GPS antenna position, setting range: 0-63 m
D: Distance from starboard to GPS antenna position, the setting range: 0-63 m
6. Press the [MENU] key to return to the INITIAL SETTINGS menu.
7. Press or key to choose SET EXT ANT POS and press the [ENT] key.
8. Enter distance for location of an external GPS antenna (if connected) similar to
how you did for the internal GPS antenna.
9. Finally press the [MENU] key to save the settings.
20
[SET INT ANT POS.]
A: 0 m
B: 0 m
A
C: 0 m
D: 0 m
B
C D
QUIT[MENU]
SET INT ANT POS. sub-menu
(Data entry)