Connections And Maintenance; Antenna; Fuse Replacement; Cleaning - Furuno FM-3000 Operator's Manual

8. Connections and Maintenance

8.1 Antenna

A key element in the performance of any communication sys-
tem is an antenna. Ask your dealer about antennas and the
best place to mount them.

8.2 Fuse Replacement

One fuse is installed in the supplied DC power cable. If a fuse
blows or the transceiver stops functioning, track down the
source of the problem, if possible, and replace the damaged
fuse with a new, rated one.

8.3 Cleaning

If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
AVOID the use of solvents such as benzene or al-
cohol, as they may damage transceiver surfaces.
41
Fuse rating: 10 A
8.4 Connections
q
w
q DC POWER CONNECTOR
Connects the supplied DC power cable from this connector
to an external 13.8 V DC power source.
w EXTERNAL MICROPHONE JACKS
Connects to optional FM-3010
R R CAUTION
NEVER
connect other microphones, this may cause
damage to the transceiver.
t
r
e
.
CONTROLLABLE MIC