Furuno FA-150 Installation Manual page 93

Example:
Figure 7: Populated device listing
On this example you can see a list being populated of two present multiplexers on the network,
represented by their hostname, IP address, Netmask and default gateway (which is an optional
settings and can be emplty).
By double clicking on a line of this list you can then enter the configuration of this specific
multiplexer. The settings of this multiplexer will be downloaded automatically (see progress bar
4).
NOTE: To be able to modify the configuration of a multiplexer the current computer must be in
the same subnet.
Clicking Exit (3) simply closes the complete application.
U
lstein Power & Control AS
This document and its content is the property of ULSTEIN. Non-
public information contained herein shall be treated as
Confidential Information. No use, copying, citation or publication
of this document or its content is permitted without prior written
consent from ULSTEIN. Any conflicts arising from unauthorized
use shall be governed by the laws of Norway.
File Name: Page:
Page 21 of
BRI-D32004-01II (D)
System Installation 56
Manual.doc